Lost Vape Ursa Quest Multi Kit Review: Test Results Are In

Product intro and specs

The Ursa Quest Multi Kit is the latest kit from popular manufacturer Lost Vape. They gained popularity in vaping for making nice fancy mods (typically with leather or wood) and using DNA chipsets. While they have been known for more expensive high-end mods, they’ve lately gotten into the pod game, by making various pod kits like the Orion and Lyra.

The Ursa Quest keeps the style and looks of a high-end mod, but uses their own Quest chip to make this kit more affordable. This kit includes the Ursa Quest, which is a single 2x700 battery mod that’s rated at 100 watts, and the Ursa Pod tank—a sub ohm pod tank that connects directly to the mod through a proprietary connection. The kit does include a 510 adapter for the mod so you can use any atomizer on it as well.

Price: $99.99 (at Element Vape)

Colors: SS, gunmetal, black (in a variety of leather or wood designs)

First impressions

Unboxing this kit, was pretty impressed with the design and feel. I received the SS Ukiran leather one and the leather looks great. The mod has some heft to it and feels solid in the hand, but it’s not too bulky at all. It’s a bit too tall with the 510 adapter and your own atomizer, but with the included Ursa pod tank it’s not too bad. It’s larger than most advanced pods—not by too much, but they did have to make room for a 21700 battery.

It came in a nice box presentation and had two coils and two tanks. Not a spare tank, but one tank for each of the two coil types available (more on that later on). It comes with airflow control base for the pod tanks and a 510 adapter to make it usable with any of your atomizers. Overall, I was pretty happy with the design from the start.

Build quality and design

The Ursa Quest is a nicely built mod. It follows the typical designs of Lost Vape mods, which are usually classy and sleek. The frame has a matte finish to it which really makes the leather pop, and the symmetrical design makes it feel comfortable in either hand.  It also feels solid and well-built, but not too heavy. It’s going to be larger than most pods for sure, but about the size of a standard 2x700 single battery mod. It’s not a typical pod mod, it’s more of a sub ohm tank and mod kit.

The fire button is a basic rectangle on the front of the mod above the screen. Below the screen are the up and down buttons and between those is the menu button. Under the buttons is the USB-C port.  It features a nice large and bright 0.96-inch rectangular color screen that’s clear and easy to see. The 510 pin on the adapter is great and gave me no issues with any atomizer. It's listed at 33 mm wide and the 510 is centered, so realistically no atomizer you’d use on this mod should have overhang.

The mod is available in nine color options. There are three frame colors; SS, black, and gunmetal. Each color has an option of a Ukiran leather, Crocodile leather, or wood. The leathers all start as black and over time with usage start to reveal their colors. Mine already has a nice teal tint to it after only about a month of usage. My SS frame has a nice matte finish which makes the leather stand out more, and isn’t prone to fingerprints. It really is a beautiful mod.

The included tanks in every kit are black tinted and look okay on the mod, but I would have preferred them to be clear, to see the juice level better. The mod looks much nicer with a matching atomizer. Branding wise, they kept it very nice and simple thankfully. There is a small Lost Vape logo on the bottom right-side of the frame and a small Ursa Quest logo on the bottom left side. It’s in a matching color on my SS frame and doesn't take away from the mod at all. The 510 adapter does have a large Lost Vape logo on each side though.

The battery door is a threaded cap, similar to the caps that we’ve seen on various Aegis mods. It worked great though with no issues. I had no problem getting batteries in and out. I used a 21700, 20700, and 18650 (the 18650 requires the use of an included adapter). There is no button rattle on this mod at all either. Overall, it’s a great looking and well-built mod.

Features and functions

The Ursa Quest is packed with all the modes you could want from a mod and a few extras. There are two main modes; pod mode for when you are using it with the included pod, and mod mode for when you are using it with the 510 adapter. On top of that, you have Power mode (with soft, norm, and hard preheat options), and TC mode for SS904, SS316, Ti, and Ni—without a TCR adjustment option for these modes. Note that one of the pod coils is made out of SS904, but it wasn’t included in the kit so I couldn’t test it. You also get VPC (watt curve), Voltage, and Bypass modes.

There are also three user profiles available, that allow you to create presets to avoid having to adjust every time you switch between modes. Adjusting is very easy in my opinion, and I didn’t see a reason to set up the profiles. But the option is there if you want it and doesn’t really get in the way if you don’t.

Using the Ursa Quest

Swapping between the pods and the 510 adapter is pretty straightforward. There are two press-release buttons on the top front and back of the mod. Press those in and the pod or adapter will pop out of the mod. It’s best to press them in when installing the adapter or pod as well. I found this worked well for me with no issues and was easy to do.

As far as the menu goes, it’s very simple and easy to navigate. Here is a quick rundown:

Power mode performance

Testing on this mod was done with fully charged Samsung 30T Batteries. I was happy to see that they listed all three specs. They list max watts at 100, max volts at 8, and max amps at 35. During my testing, the max achieved wattage was 107, so a good rating at 100 watts on this device.

The amp limit I got was 31, which is average for a single battery mod these days. A little short of the listed 35, but more than good enough, since it was able to hit at 93 watts at 0.1 ohms.  The volt limit I got with a 0.63-ohm coil was 8.205 which is great. It shows that it has a boost circuit like all single battery mods should, and came out a little over the listed 8 volts.

The mod adjusts in 0.5-watt increments at 20 watts and above and 0.1-watt increments below 20 watts, which is nice. It’s an accurate mod, for the most part. Pretty average performance, nothing to stand out but nothing bad either. Overall, a solid performer. You can see the full results in the chart above.

They don’t list a charge rate for this mod, which is odd. While I don’t recommend charging mods internally, I did test that just for informational purposes and found the max charge rate to be 1.72 amps. I would give it a rating of 1.75A charging, since you typically round it off.

Temperature control performance

Using SS316L wire and in SS316 mode (there are no TCR settings or values shown), I tested four builds:

The power is fully adjustable as well in TC mode. I was able to get a warm vape around the 450F range, so it is pretty accurate and you can adjust for taste with plenty of wiggle room. It throttles smoothly and has good dry hit protection. I get a consistent vape every time and the power lets you adjust the ramp up. It has no issues powering any build that needs up to 100 watts. Overall, I was very impressed with the performance in in TC mode. It worked exactly as TC mode should, and is easy to set up.

Ursa Pod Tanks rundown

Ok, so let's do a quick rundown of the tank. While it looks like it comes with one and a spare, they're actually two separate tanks. One is the Ursa Pro Pod Tank which takes the UB Pro coil line, and the other is the Ursa Pod Tank which takes the UB coil line.

The Ursa Pro Pod Tank has a 7 mL capacity and fits a 810 drip tip, while the Ursa Pod Tank has a 6 mL capacity and fits a 510 drip tip. Both tanks have adjustable air via the included metal base which you use on both tanks, but the kit only comes with one. The air is easy to adjust via a metal slider and on a stopper. Both options are made for DL vaping, and closing down the airflow brings it down to a restricted DL.

The pod tanks are pretty similar to what we’ve seen from the Voopoo PnP line. It has some quirks, but it is a solid design overall. The tanks are one piece with a rubber plug to fill like most pods. The coil system is your standard plug-n-play design. To replace them, you unscrew the base from the pod tank and then pop them out from the bottom. You can't do it with a full tank, it needs to be pretty much empty. The tanks are both tinted really dark, which makes monitoring juice levels a bit challenging.

Included in the kit is one coil from each of the coil lines:

I’ve had a few Lost Vape coils in the past but none were really good, and these didn’t really stand out either. Starting off with the UB Pro P1 mesh coil, I found it best around 80 watts. Flavor was decent at best and I only was able to vape about 40 mL of juice before it burned out. Not good at all. Then onto the UB M4 Mesh coil. I found it best around 50 watts. Flavor was again decent, and the coil life was even worse with the coil only lasting about 25 mL. Overall, both the coils were pretty poor performers. They do make an RBA deck for this tank as well, but tat that point you are better off using your own RTA or RDA on the mod.

Pros / Cons

Gallery

Verdict

Overall, Lost Vape did a great job with this mod. Their Quest chip performs great and they were able to make the mod more budget friendly by using it over the DNA chip. I can't find any issues with the mod itself, and all the worthwhile cons have to do with the tanks. Sadly, the coils were a letdown, and an RBA deck doesn't make it worth using when you can use your own RTA on it instead.

All in all, I wouldn’t recommend it as a pod mod due to the lackluster performance of the coils I tested. But if you are looking for a single 2x700 mod to pair with your own atomizer, this is a great choice for both TC and power mode users.

Let me know what you think in the comments and thanks for reading!

Lost Vape Ursa Quest Multi Kit